![]() ![]() Wait until the USR status led stops flashing. Keep holding until the first beep, then release it when you see activity in tinypxe.ĥ. To netboot: hold the RESet button while powering up the router. Plug the ethernet cable into port 1 of the router and tftp netboot.Ĥa. Uncheck the box in the “Boot File” section and select the initramfs-kernel.bin file for the router.Ĥ. You can also disable other interfaces like wifi, etc.ģb. ![]() Restart tinypxe, then power off the router. If it's not, connect to the router and power it on normally. Make sure option 54 is the same ip as the static one just set. Change the static ip of the wired interface on your computer to 192.168.1.10ģ. If the installation fail, you might need to upgrade/downgrade to RouterOS 6.49.2, as reported inĢ. Follow MikroTik Common Procedures to install the OpenWrt firmware.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |